Looks like something in the build process is trying to seek on a pipe. I'm not sure what could possibly be causing that while loading the osutils.jl file though.
On Sun, Jan 26, 2014 at 8:46 PM, Rajan Gurjar <[email protected]> wrote: > strace crashed with SIGILL in __GI_raise() is what the crash report shows. > Not sure how to get this crash report. It is sending an error report and it > must be going to Ubuntu developer site. > > lseek(2, 0, SEEK_CUR) = -1 ESPIPE (Illegal seek) > rt_sigreturn() = 27531024 > --- SIGILL {si_signo=SIGILL, si_code=ILL_ILLOPN, si_addr=0x7fe111341e44} > --- > +++ killed by SIGILL (core dumped) +++ > Illegal instruction (core dumped) > > > > On Sun, Jan 26, 2014 at 8:00 PM, Rajan Gurjar <[email protected]>wrote: > >> I did usr/bin/julia-debug-basic instead. It ran for a while and then >> closed after giving a system error warning. >> And the terminal screen rolls down with lots of data. Is it supposed to >> create an image that I should post? >> Not clear. I also see julia-debug-readline but no julia. >> Thanks >> >> >> On Sun, Jan 26, 2014 at 7:52 PM, Rajan Gurjar <[email protected]>wrote: >> >>> rajan@rajan-Aspire-5742Z:~/julia/base$ strace /usr/bin/julia --build >>> output sysimg.jl >>> strace: Can't stat '/usr/bin/julia': No such file or directory >>> >>> >>> >>> On Sun, Jan 26, 2014 at 7:41 PM, Elliot Saba <[email protected]>wrote: >>> >>>> Nope, sometimes VMs can cause an illegal instruction error. >>>> >>>> What is the output of `strace ../usr/bin/julia --build output >>>> sysimg.jl`? Execute that inside of the `base` folder. >>>> -E >>>> >>>> >>>> On Sun, Jan 26, 2014 at 4:19 PM, Rajan Gurjar <[email protected]>wrote: >>>> >>>>> No, but I do have a VM installed. Not using it though for Julia. >>>>> Do you think I should try it instead? >>>>> >>>>> >>>>> On Sun, Jan 26, 2014 at 6:18 PM, Elliot Saba <[email protected]>wrote: >>>>> >>>>>> Rajan, are you running inside of a VM? >>>>>> >>>>>> >>>>>> On Sun, Jan 26, 2014 at 1:46 PM, Rajan Gurjar >>>>>> <[email protected]>wrote: >>>>>> >>>>>>> Just tried "make debug" after "make clean" >>>>>>> but exactly the same output as before >>>>>>> LINK usr/bin/julia-debug-readline >>>>>>> CC ui/repl-basic.do >>>>>>> LINK usr/bin/julia-debug-basic >>>>>>> >>>>>>> osutils.jl >>>>>>> Illegal instruction (core dumped) >>>>>>> make[1]: *** [/home/rajan/julia/usr/lib/julia/sys0.bc] Error 132 >>>>>>> make: *** [debug] Error 2 >>>>>>> >>>>>>> >>>>>>> >>>>>>> On Sun, Jan 26, 2014 at 3:54 PM, Rajan Gurjar >>>>>>> <[email protected]>wrote: >>>>>>> >>>>>>>> processor : 0 >>>>>>>> vendor_id : GenuineIntel >>>>>>>> cpu family : 6 >>>>>>>> model : 37 >>>>>>>> model name : Intel(R) Pentium(R) CPU P6100 @ 2.00GHz >>>>>>>> stepping : 5 >>>>>>>> microcode : 0x2 >>>>>>>> cpu MHz : 933.000 >>>>>>>> cache size : 3072 KB >>>>>>>> physical id : 0 >>>>>>>> siblings : 2 >>>>>>>> core id : 0 >>>>>>>> cpu cores : 2 >>>>>>>> apicid : 0 >>>>>>>> initial apicid : 0 >>>>>>>> fpu : yes >>>>>>>> fpu_exception : yes >>>>>>>> cpuid level : 11 >>>>>>>> wp : yes >>>>>>>> flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge >>>>>>>> mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe >>>>>>>> syscall >>>>>>>> nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology >>>>>>>> nonstop_tsc aperfmperf pni dtes64 monitor ds_cpl est tm2 ssse3 cx16 >>>>>>>> xtpr >>>>>>>> pdcm pcid popcnt lahf_lm arat dtherm >>>>>>>> bogomips : 3990.03 >>>>>>>> clflush size : 64 >>>>>>>> cache_alignment : 64 >>>>>>>> address sizes : 36 bits physical, 48 bits virtual >>>>>>>> power management: >>>>>>>> >>>>>>>> processor : 1 >>>>>>>> vendor_id : GenuineIntel >>>>>>>> cpu family : 6 >>>>>>>> model : 37 >>>>>>>> model name : Intel(R) Pentium(R) CPU P6100 @ 2.00GHz >>>>>>>> stepping : 5 >>>>>>>> microcode : 0x2 >>>>>>>> cpu MHz : 1999.000 >>>>>>>> cache size : 3072 KB >>>>>>>> physical id : 0 >>>>>>>> siblings : 2 >>>>>>>> core id : 2 >>>>>>>> cpu cores : 2 >>>>>>>> apicid : 4 >>>>>>>> initial apicid : 4 >>>>>>>> fpu : yes >>>>>>>> fpu_exception : yes >>>>>>>> cpuid level : 11 >>>>>>>> wp : yes >>>>>>>> flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge >>>>>>>> mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe >>>>>>>> syscall >>>>>>>> nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology >>>>>>>> nonstop_tsc aperfmperf pni dtes64 monitor ds_cpl est tm2 ssse3 cx16 >>>>>>>> xtpr >>>>>>>> pdcm pcid popcnt lahf_lm arat dtherm >>>>>>>> bogomips : 3990.03 >>>>>>>> clflush size : 64 >>>>>>>> cache_alignment : 64 >>>>>>>> address sizes : 36 bits physical, 48 bits virtual >>>>>>>> power management: >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> On Sun, Jan 26, 2014 at 2:27 PM, Jameson Nash <[email protected]>wrote: >>>>>>>> >>>>>>>>> I think he mentioned this was a clean build, from scratch. >>>>>>>>> >>>>>>>>> Rajan, what's your processor? also try `make debug` and see if that >>>>>>>>> prints anything more when in crashes >>>>>>>>> >>>>>>>>> On Sun, Jan 26, 2014 at 2:21 PM, Tim Holy <[email protected]> >>>>>>>>> wrote: >>>>>>>>> > On Sunday, January 26, 2014 11:16:24 AM Rajn wrote: >>>>>>>>> >> Bump anyone? What does this mean? Next steps please? >>>>>>>>> > >>>>>>>>> > Have you tried "make clean; make"? >>>>>>>>> > --Tim >>>>>>>>> > >>>>>>>>> >> >>>>>>>>> >> osutils.jl >>>>>>>>> >> Illegal instruction (core dumped) >>>>>>>>> >> make[1]: *** [/home/rajan/julia/usr/lib/ >>>>>>>>> >> julia/sys0.bc] Error 132 >>>>>>>>> >> make: *** [release] Error 2 >>>>>>>>> >> >>>>>>>>> >> On Friday, January 24, 2014 10:30:18 PM UTC-5, Rajn wrote: >>>>>>>>> >> > After my several failed attempts to run PyPlot through Julia >>>>>>>>> in Windows, I >>>>>>>>> >> > decided to give up and try Linux. >>>>>>>>> >> > Guess it was even worse. >>>>>>>>> >> > >>>>>>>>> >> > First I added to regular repository (not the nightlybuild) >>>>>>>>> >> > then added the dep-repository >>>>>>>>> >> > then updated and >>>>>>>>> >> > then installed julia >>>>>>>>> >> > >>>>>>>>> >> > Here's the latest: >>>>>>>>> >> > Unpacking librmath-dev (from >>>>>>>>> >> > .../librmath-dev_2.15.2-juliadeps2~raring_amd64.deb) ... >>>>>>>>> >> > dpkg: error processing >>>>>>>>> >> > >>>>>>>>> /var/cache/apt/archives/librmath-dev_2.15.2-juliadeps2~raring_amd64.deb >>>>>>>>> >> > >>>>>>>>> >> > (--unpack): >>>>>>>>> >> > trying to overwrite '/usr/include/Rmath.h', which is also in >>>>>>>>> package >>>>>>>>> >> > >>>>>>>>> >> > r-mathlib 3.0.1-3ubuntu1 >>>>>>>>> >> > No apport report written because MaxReports is reached already >>>>>>>>> >> > >>>>>>>>> >> > >>>>>>>>> Selecting >>>>>>>>> >> > >>>>>>>>> >> > previously unselected package julia. >>>>>>>>> >> > Unpacking julia (from .../julia_0.2.0~saucyfinal1_amd64.deb) >>>>>>>>> ... >>>>>>>>> >> > Processing triggers for man-db ... >>>>>>>>> >> > >>>>>>>>> >> > Errors were encountered while processing: >>>>>>>>> >> > >>>>>>>>> >>>>>>>>> /var/cache/apt/archives/librmath-dev_2.15.2-juliadeps2~raring_amd64.deb >>>>>>>>> >> > >>>>>>>>> >> > E: Sub-process /usr/bin/dpkg returned an error code (1) >>>>>>>>> >> > >>>>>>>>> >> > Have no clue absolutely how to proceed. The same issue occurs >>>>>>>>> when I try >>>>>>>>> >> > nightly builds. >>>>>>>>> >>>>>>>> >>>>>>>> >>>>>>> >>>>>> >>>>> >>>> >>> >> >
