The github issue is still open and I guess the solution for the above problem hasn't been found yet. I had to switch to direct connection to able to PkgDev.submit().
*Yours Sincerely,* *Ayush Pandey* * <https://github.com/Ayush-iitkgp> * *LinkedIn Profile <https://www.linkedin.com/pub/ayush-pandey/66/9/a52> * *GitHub <https://github.com/Ayush-iitkgp>* On Tue, Mar 8, 2016 at 5:20 AM, Yichao Yu <[email protected]> wrote: > On Mon, Mar 7, 2016 at 6:46 PM, Ayush Pandey <[email protected]> > wrote: > > Pkg.add() error was solved using the above thread. > > I have already setup my Julia as per the instructions given in the thread > > still the PkgDev.submit() error persist. > > Ahh, in which case it might be related to > https://github.com/JuliaLang/julia/issues/15381 ? > > > > > > > Yours Sincerely, > > Ayush Pandey > > LinkedIn Profile > > GitHub > > > > On Tue, Mar 8, 2016 at 4:13 AM, Yichao Yu <[email protected]> wrote: > >> > >> On Mon, Mar 7, 2016 at 5:32 PM, Ayush Pandey <[email protected] > > > >> wrote: > >> > Thanks a lot. It did help :) > >> > But now I seem to be running into a newer problem. > >> > > >> > PkgDev.submit("Convex") > >> > INFO: Forking JuliaOpt/Convex.jl to Ayush-iitkgp > >> > Enter host password for user 'Ayush-iitkgp': > >> > > >> > ERROR: Unknown value > >> > Line: 0 > >> > Around: ...HTTP/1.1 201 Created ... > >> > ^ > >> > > >> > in error(::ASCIIString) at ./error.jl:21 > >> > [inlined code] from ./strings/types.jl:185 > >> > in _error(::ASCIIString, ::JSON.Parser.ParserState{ASCIIString}) at > >> > /home/hduser/.julia/v0.5/JSON/src/Parser.jl:61 > >> > in parse_value(::JSON.Parser.ParserState{ASCIIString}, ::Type{T}) at > >> > /home/hduser/.julia/v0.5/JSON/src/Parser.jl:218 > >> > in #parse#1(::Type{Dict{K,V}}, ::Any, ::ASCIIString) at > >> > /home/hduser/.julia/v0.5/JSON/src/Parser.jl:308 > >> > in token(::ASCIIString) at > >> > /home/hduser/.julia/v0.5/PkgDev/src/github.jl:78 > >> > [inlined code] from /home/hduser/.julia/v0.5/PkgDev/src/github.jl:56 > >> > in req(::ASCIIString, ::Void, ::Cmd) at > >> > /home/hduser/.julia/v0.5/PkgDev/src/github.jl:88 > >> > in POST(::ASCIIString) at > >> > /home/hduser/.julia/v0.5/PkgDev/src/github.jl:101 > >> > in fork(::SubString{UTF8String}, ::SubString{UTF8String}) at > >> > /home/hduser/.julia/v0.5/PkgDev/src/github.jl:114 > >> > in (::PkgDev.Entry.##2#3)(::Base.LibGit2.GitRepo) at > >> > /home/hduser/.julia/v0.5/PkgDev/src/entry.jl:32 > >> > in with(::PkgDev.Entry.##2#3, ::Base.LibGit2.GitRepo) at > >> > ./libgit2/types.jl:481 > >> > in #pull_request#1(::ASCIIString, ::ASCIIString, ::ASCIIString, > ::Any, > >> > ::ASCIIString) at /home/hduser/.julia/v0.5/PkgDev/src/entry.jl:13 > >> > [inlined code] from ./boot.jl:331 > >> > in submit(::ASCIIString, ::ASCIIString) at > >> > /home/hduser/.julia/v0.5/PkgDev/src/entry.jl:45 > >> > [inlined code] from /home/hduser/.julia/v0.5/PkgDev/src/entry.jl:43 > >> > in > >> > > >> > > (::Base.Pkg.Dir.##2#3{Array{Any,1},PkgDev.Entry.#submit,Tuple{ASCIIString}})() > >> > at ./pkg/dir.jl:31 > >> > in > >> > > >> > > cd(::Base.Pkg.Dir.##2#3{Array{Any,1},PkgDev.Entry.#submit,Tuple{ASCIIString}}, > >> > ::UTF8String) at ./file.jl:47 > >> > in #cd#1(::Array{Any,1}, ::Any, ::Any, ::ASCIIString, > >> > ::Vararg{ASCIIString}) at ./pkg/dir.jl:31 > >> > [inlined code] from ./boot.jl:331 > >> > in submit(::ASCIIString) at > >> > /home/hduser/.julia/v0.5/PkgDev/src/PkgDev.jl:44 > >> > in eval(::Module, ::Any) at ./boot.jl:267 > >> > > >> > I am behind a corporate proxy. > >> > > >> > > >> > When I run ssh -T [email protected] > >> > Hi Ayush-iitkgp! You've successfully authenticated, but GitHub does > not > >> > provide shell access. > >> > > >> > It is giving the expected result. > >> > > >> > I am using Corkscrew and my ~/.ssh/config file has the following > >> > configuration > >> > User git > >> > Hostname ssh.github.com > >> > Port 443 > >> > ProxyCommand corkscrew 10.3.100.207 8080 %h %p > >> > IdentityFile /home/hduser/.ssh/id_rsa > >> > > >> > Any help would be appreciated :) > >> > >> See https://github.com/JuliaLang/julia/issues/13472 > >> > >> > > >> > > >> > Yours Sincerely, > >> > Ayush Pandey > >> > LinkedIn Profile > >> > GitHub > >> > > >> > On Tue, Mar 8, 2016 at 2:57 AM, Tim Holy <[email protected]> wrote: > >> >> > >> >> The error message could be more explicit, but I suspect it should be > >> >> `PkgDev.submit`, not `Pkg.submit`. You have to say `using PkgDev` > >> >> before > >> >> it > >> >> will work. > >> >> > >> >> Best, > >> >> --Tim > >> >> > >> >> On Tuesday, March 08, 2016 01:07:56 AM Ayush Pandey wrote: > >> >> > Hi, > >> >> > > >> >> > I am tryig to submit a patch to Convex.jl package following the > >> >> > instructions from > >> >> > http://docs.julialang.org/en/release-0.4/manual/packages/ > >> >> > > >> >> > The error comes when i run > >> >> > Pkg.submit("Convex") > >> >> > > >> >> > The following error comes: > >> >> > > >> >> > "ERROR: Pkg.submit(pkg[, commit]) has been moved to the package > >> >> > PkgDev.jl. > >> >> > Run Pkg.add("PkgDev") to install PkgDev on Julia v0.5-" > >> >> > > >> >> > I have already installed *PkgDev* but the error don't seem to be > >> >> > going > >> >> > away. > >> >> > > >> >> > What are the parameters that needs to be passed to Pkg.submit() ? > >> >> > > >> >> > > >> >> > > >> >> > > >> >> > > >> >> > *Yours Sincerely,* > >> >> > *Ayush Pandey* * <https://github.com/Ayush-iitkgp> * > >> >> > *LinkedIn Profile > >> >> > <https://www.linkedin.com/pub/ayush-pandey/66/9/a52> > >> >> > * > >> >> > *GitHub <https://github.com/Ayush-iitkgp>* > >> >> > >> > > > > > >
