Dear Jukka

So we can get to the bottom of this, could you send me a copy of the 
model files that cause the problem.

As a matter if interest, you should not end up with a "system jam",  
 From the Task manager you should be able to identify the Java runtime  
environment - just kill this application.

Geoff

Rahkonen Jukka wrote:
> Hi,
>
> I will make more tests next week and send test data for you if problem is 
> still present. And of course I will make another test with printer installed. 
>  Actually I have printers installed on this computer, but only network 
> printers which I cannot connect with right now.  Anyway, if the reason is 
> missing printer then I would prefer seeing some error message instead of 
> system jam.
>
> -Jukka- 
>
>
> -----Original Message-----
> From: [EMAIL PROTECTED] on behalf of Geoffrey G Roy
> Sent: Sat 22.9.2007 3:28
> To: List for discussion of JPP development and use.
> Subject: Re: [JPP-Devel] Cadplan Printer plugin kills my computer
>  
> Dear Jukka
>
> I do not test the plugin on every build,  I have tested up to 
> openjump-20070820-0017.  If you can send to me your project/layers that 
> cause the problem I will take  a look at it.
>
> It may be that if there is no printer installed this may cause a problem 
> - why don't you try installing a printer and let me know hat happens
>
> Geoff
>
>
> Rahkonen Jukka wrote:
>   
>> Hi,
>>
>> Daily build works OK as far as I have tested it.  Printer plugin seems to 
>> work also, it is just that feeding a new value to the scale box makes system 
>> freese.  Actually I don't have any printer installed on my laptop so I have 
>> not been able to test if I could print with the plugin.  Ii may well be so 
>> that the printer plugin has never been tested without printer.
>>
>> -Jukka-
>>
>>
>> -----Original Message-----
>> From: [EMAIL PROTECTED] on behalf of Stefan Steiniger
>> Sent: Fri 21.9.2007 18:56
>> To: List for discussion of JPP development and use.
>> Subject: Re: [JPP-Devel] Cadplan Printer plugin kills my computer
>>  
>> so it means.. it will work without the plugins well?
>>
>> stefan
>>
>> Rahkonen Jukka schrieb:
>>   
>>     
>>> Hi,
>>>
>>> I was able to reproduce this several times:
>>> - fresh OJ nightly build openjump-20070921-0020
>>> - JumpPrinter and VertexSymbols extensions installed
>>> - open one polygon layer
>>> - scale is something like 1:12 633 636
>>>
>>> If I now insert 5000 as scale nominator and press Enter my computer 
>>> (Windows XP) freezes totally. I can't open task manager, even Shut down 
>>> cannot be used.  Only way to shut down is to use the power switch.
>>>
>>> -Jukka Rahkonen-
>>>
>>>
>>>
>>> -------------------------------------------------------------------------
>>> This SF.net email is sponsored by: Microsoft
>>> Defy all challenges. Microsoft(R) Visual Studio 2005.
>>> http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
>>> _______________________________________________
>>> Jump-pilot-devel mailing list
>>> Jump-pilot-devel@lists.sourceforge.net
>>> https://lists.sourceforge.net/lists/listinfo/jump-pilot-devel
>>>
>>>
>>>     
>>>       
>> -------------------------------------------------------------------------
>> This SF.net email is sponsored by: Microsoft
>> Defy all challenges. Microsoft(R) Visual Studio 2005.
>> http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
>> _______________________________________________
>> Jump-pilot-devel mailing list
>> Jump-pilot-devel@lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/jump-pilot-devel
>>
>>
>> -------------------------------------------------------------------------
>> This SF.net email is sponsored by: Microsoft
>> Defy all challenges. Microsoft(R) Visual Studio 2005.
>> http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
>> _______________________________________________
>> Jump-pilot-devel mailing list
>> Jump-pilot-devel@lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/jump-pilot-devel
>>
>>
>>   
>>     
>
>   

-- 
Dr Geoffrey G Roy
Cadplan
129 Gloster Street, Subiaco WA 6008
Tel: (08) 9381 4870  Fax: (08) 9382 4459
Email: [EMAIL PROTECTED]
http://www.cadplan.com.au



-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2005.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Jump-pilot-devel mailing list
Jump-pilot-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/jump-pilot-devel

Reply via email to