Hi Jukka, thank you very much for the interesting test.
Maybe it is a solution that the user can choose in OJ the timeout. But I don't know how complicated this is. Greetings from a sunny Hamburg :-) Uwe Am 11.06.2015 um 14:03 schrieb Rahkonen Jukka (MML): > Hi, > > I confirm that old OJ versions seem to have a longer timeout and they can > contact that geoportal server reliably. The server is responding sometimes > within 5 seconds but more often it takes longer. Increasing timeout to 10 > seconds feels good to me but I wonder if even that could be too strict? > Servers with loads of layers may be slow with generating GetCapabilities > because there can be lot of work to be done for computing the layer extents > etc. See the report below about failed trial with geoportal-th.de: > > SESSION STATE: Aborted. > The request was forwarded to the gateway. > Response Entity Size: 2231551 bytes. > > == FLAGS ================== > BitFlags: [ServerPipeReused, SentToGateway] 0x810 > X-ABORTED-WHEN: SendingResponse > X-CLIENTIP: 127.0.0.1 > X-CLIENTPORT: 64877 > X-EGRESSPORT: 64872 > X-PROCESSINFO: javaw:7200 > X-RESPONSEBODYTRANSFERLENGTH: 2231551 > X-SERVERSOCKET: REUSE ServerPipe#25 > > == TIMING INFO ============ > ClientConnected: 14:51:18.419 > ClientBeginRequest: 14:51:18.424 > GotRequestHeaders: 14:51:18.424 > ClientDoneRequest: 14:51:18.424 > Determine Gateway: 0ms > DNS Lookup: 0ms > TCP/IP Connect: 0ms > HTTPS Handshake: 0ms > ServerConnected: 14:50:49.009 > FiddlerBeginRequest: 14:51:18.427 > ServerGotRequest: 14:51:18.428 > ServerBeginResponse: 14:51:23.921 > GotResponseHeaders: 14:51:23.921 > ServerDoneResponse: 14:51:27.143 > ClientBeginResponse: 14:51:27.144 > ClientDoneResponse: 14:51:27.144 > > Overall Elapsed: 0:00:08.720 > > > -Jukka Rahkonen- > > Uwe Dalluege wrote: > > Hi Michaël, > > I received a mail from a German OJ user (OJ 1.8.0-r4164-plus) with the same > problem like you have (timeout) with the url: > > http://www.geoproxy.geoportal-th.de/geoproxy/services?VERSION=1.1.1& > > He told me that *it works* with OJ Version 1.6.3-r3576-plus. > > Unfortunately I can no reproduce this error. > Maybe you can reproduce it? > > Regards > > Uwe > > > Am 10.06.2015 um 13:51 schrieb Michaël Michaud: >> Hi, >> >> I get a socket timeout for a valid wms address. >> There are several places where a timeout is hardcoded in the WMS source : >> I have a url which does not use proxy and which timeout during the >> getCapability operation. >> Should I change the default timeout from 5000 to 10000 in the >> WMSService class ? >> >> Michaël >> >> >> ---------------------------------------------------------------------- >> -------- _______________________________________________ >> Jump-pilot-devel mailing list >> Jump-pilot-devel@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/jump-pilot-devel >> > > ------------------------------------------------------------------------------ > _______________________________________________ > Jump-pilot-devel mailing list > Jump-pilot-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/jump-pilot-devel > ------------------------------------------------------------------------------ _______________________________________________ Jump-pilot-devel mailing list Jump-pilot-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/jump-pilot-devel