Hi Michael,
I did the tests on your files and had the same output. OJ uses JAI to read
jp2, eventually gdal if libs are installed into "native" folder.
I've never tried gdal: it might works as QGIS uses it
Peppe
2016-10-01 10:41 GMT+02:00 Michaël Michaud <m.michael.mich...@orange.fr>:
> Hi jumpers,
>
> I've problems with image driver which does not read jp2 files correctly
>
> I put some images here :
> https://www.dropbox.com/sh/02kbw1biy6els4c/AADEcYAkuq6XW5czz00ONj1La?dl=0
>
> - Image "test" found on the cloud is read correctly by OpenJUMP0
>
> - Image 44* are read by OpenJUMP but with a very poor resolution (and
> without referencing). It is read correctly by QGis
>
> - Image 974* freeze the application (QGis can read it)
>
> What are your experience with jp2 ? Someone to investigate ?
>
> Michaël
>
>
> ------------------------------------------------------------
> ------------------
> Check out the vibrant tech community on one of the world's most
> engaging tech sites, SlashDot.org! http://sdm.link/slashdot
> _______________________________________________
> Jump-pilot-devel mailing list
> Jump-pilot-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/jump-pilot-devel
>
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, SlashDot.org! http://sdm.link/slashdot
_______________________________________________
Jump-pilot-devel mailing list
Jump-pilot-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/jump-pilot-devel
