Peppe, please reply on sf.net and close/tag the tickets appropriately usually there is a link in the message like >> * [bugs:#483] <https://sourceforge.net/p/jump-pilot/bugs/483/>
..ede On 29.08.2020 10:43, Giuseppe Aruta wrote: > Yes. It Is solved in my tests. No feedback from whom pointed out the bug > > Il sab 29 ago 2020, 10:31 AM michael michaud via Jump-pilot-devel < > jump-pilot-devel@lists.sourceforge.net> ha scritto: > >> Peppe, is thi salready fixed in 1.15? >> ------------------------------ >> >> * [bugs:#483] <https://sourceforge.net/p/jump-pilot/bugs/483/> >> RasterStyleDialog freezes if the selected raster has only one value (raster >> used as mask)* >> >> *Status:* pending >> *Milestone:* >> *Created:* Thu Dec 20, 2018 11:25 AM UTC by Giuseppe Aruta >> *Last Updated:* Thu Dec 20, 2018 05:25 PM UTC >> *Owner:* Giuseppe Aruta >> >> RasterStyleDialog freezes if the selected raster has only one value. >> Raster layers where cells can have only one value are typically used as >> mask on other raster layer. Tecnically these raster have only cells with a >> defined unique value (generally 1) and other cells that have a nodata >> value. >> >> The problem seems connected to the metter that OpenJUMP sextante raster >> defines by defaut a stretched classification as style on a raster ( >> RasterSymbology.TYPE_RAMP). It is required at least 2 values (ex. 1 and 0) >> dor a stretched classification while mask raster layer could have only one. >> >> The solution which I am going to apply on SVN >> >> a) RasterLayer.class. Make a default classification (only for such mask >> raster) as single interval (RasterSymbology.TYPE_SINGLE) so that the layer >> tree legend is obliged to show only one value >> >> b) RasterSymbologyDialog.class. Create a dummy panel that substitutes >> stretched classification panel (only for such mask raster) and shown a >> message that selected raster has only one value >> ------------------------------ >> >> Sent from sourceforge.net because jump-pilot-devel@lists.sourceforge.net >> is subscribed to https://sourceforge.net/p/jump-pilot/bugs/ >> >> To unsubscribe from further messages, a project admin can change settings >> at https://sourceforge.net/p/jump-pilot/admin/bugs/options. Or, if this >> is a mailing list, you can unsubscribe from the mailing list. >> _______________________________________________ >> Jump-pilot-devel mailing list >> Jump-pilot-devel@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/jump-pilot-devel >> > > > > _______________________________________________ > Jump-pilot-devel mailing list > Jump-pilot-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/jump-pilot-devel > _______________________________________________ Jump-pilot-devel mailing list Jump-pilot-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/jump-pilot-devel
