Ehlo, AFAIK variance knob is relevant only for EIGRP on CSCO boxes. Generally , it may be difficult to achieve something other that ECMP in OSPF due to protocol characteristics ( SPF etc ).If you want to achieve some unequal load balancing on your IGP domain you can try MPLS TE LSP unequal load-balance with bandwith statement under [edit protocols rsvp load-balance].
regards Piotr Marecki ----- Original Message ----- From: "Farhan Jaffer" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Tuesday, January 09, 2007 4:38 PM Subject: [j-nsp] Unequal Path Loadbalance in OSPF? > How to configure unequal load balacing in OSPF to the same destination via > different paths ? > > In Cisco, we have 'variance' factor for this purpose, is there anything > equivalent in Junos ? > > Regards > -FJ > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
