Dear Yeshoda 6to4 tunneling is a separate mechanism.....than IPv6 over IPv4 Tunnels or IPv6 over MPLS LSP..... the difference is in the dynamic nature of 6to4 tunnel as compared to IPv6 over IPv4 tunnel using ip-ip or GRE tunnels....
I never mean that it is not possible to deploy IPv6 using Juniper, but yah...if someone go for 6to4 or ISATAP tunneling technique it is not possible through Juniper. I believe once the RFC has been defined and it became a standard than Juniper should go for it. Need some comments from Juniper Engineers on this list. Regards Fahad On 1/15/07, Yeshoda Reddy <[EMAIL PROTECTED]> wrote: > > This doesn't mean we don't support connection of ipv6 via ipv4 cloud. > > Juniper does support the 6to4 tunneling using explicit tunnels (MPLS > tunnels in the core) > > Regards > Yeshoda > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of FAHAD ALI KHAN > Sent: Monday, January 15, 2007 3:12 PM > To: juniper-nsp > Subject: [j-nsp] IPv6 6to4 tunneling support > > Guys...! > > I am amaze to see that Juniper didn't support 6to4 & ISATAP tunneling > mechanisms....as it is supported by number of other vendors like CISCO, > 6WIND, Hitachi...etc...a/c to the RFC 3056. > > Can anybody tell me why Juniper is lacking behind other vendor in IPv6 > deployment....! > > Regards > > Fahad > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
