--
Not so long ago you wrote :
BS> The configuration is the same like configuring normal route
BS> reflector except you must enable family inet-vpn for L3VPN. The
BS> important thing is you must have a LSP to all PEs because without
BS> LSP or reachability, the RR will mark the routes as unusable and not
advertised it to the PEs.
Or .. you add a discard route to the loopback addresse network on
the P-router in inet.3, then the routes will not be marked as
unusable. It's easier than configuring LSP's between PE - P
routers.
i.e.
# show routing-options
rib inet.3 {
static {
route 192.168.0.0/24 discard;
}
}
cheers
Sean
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
