If you just mean you want to look at changes you just made in config mode but haven't committed yet, just do a show conf. Your uncommitted changes will be there. To compare to the running (committed) configuration, do a "show | compare rollback 0"
Hth, -Jeff -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Aamir Amin Sent: Tuesday, January 23, 2007 8:04 AM To: [email protected] Subject: [j-nsp] showing uncommittted config Hi Guys, Is there a way of showing configuration that hasn't been committed? thanks ----------- The information in this email and any files transmitted with it are intended for the named recipient and may be confidential, privileged or otherwise protected from disclosure. If you are not the intended recipient you must not read, copy, disclose, forward or otherwise use the information contained in this email or in any files transmitted with it. If you have received this e-mail in error, please notify the sender immediately by reply e-mail and delete the message and any files transmitted with it without retaining any copies. Any representations or commitments expressed in this email are subject to contract. AboveNet Communications UK Limited is a company registered in England under No. 3726666. Registered office: Anchorage House, 2 Clove Crescent, London, E14 2BE. _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
