I've been in the process of setting up multiple BGP peers on logical routers, and am attempting to use Nagios to check the status of the peers.
This has worked fine using the "check_bgpstate" and "check_bgp" plugins, but doesn't seem to work under logical routers. I did an snmpwalk of the BGP mibs, and the only peers that seem to show up are the ones configured under the "main" router, nothing about the ones under the logical router. It's not possible to modify the "SNMP" section of the config under the logical router, only under the "master". Does this mean you cannot poll BGP (or other specific SNMP values) under the logical router? This will make network monitoring of peers under the logical router kind of a problem. _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
