On http://www.juniper.net/techpubs/software/erx/junose80/swconfig-link/html/dynamic-interfaces-upperlayer-config5.html#2419436 a setup is explained with "ip service-profile" that is supposed to replace the "subscriber" command for rfc1483/bridged over ATM VCs.
I've taken my working rfc1483/bridged setup (with the subscriber command), replaced the subscriber command with the setup as explained, and it doesn't work - the dynamic interface just comes up without the e-series ever talking to the radius server. Does anyone know if this is supposed to work in JunosE 8.0.1, and if so, what am I missing ? Thanks Mike. _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
