Hi, I'm having a problem sending packets >230 bytes to a pppoa subscriber interface.
Pinging the subscriber from the ERX310 box with a data-size lower then 230 works fine, but above it drops all the packets. This is not just for icmp packets but for all data packets. (So subscriber is unable to surf the net). The subscriber is provisioned through bulk-config. some stats: Interface ATM-Prot VCD VPI VCI Type Encap MTU Status Type --------- -------- --- --- --- ------- ----- ---- ------ --------- ATM 2/0.1 RFC-1483 3 1 99 PVC AUTO 9180 up Dynamic There is an AccIntern route to the customer: Prefix/Length Type Next Hop Dst/Met Interface a.b.c.d/32 AccIntern 0.0.0.0 2/0 ATM2/0.1 The dynamic ppp profile sets the Administrative MTU to 1500. I'm looking for hints on where to look for with this problem. Thanks in advance, Richard _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
