Hi Alexander, You can try and do what it suggests - run FSCK on the harddisk
If that's not possible, try rebuilding from an external PCMCIA card, sometimes you can recover the disk this way. Not really feasible to run without a harddisk - theoretically possible, but you need to turn off all logging, maybe you are lucky and it runs for a while Cheers Sean -- Not so long ago you wrote : AS> Hi, AS> Recently our m7i lost its hard disk - it is present in setup, but while AS> booting the device is not detected: AS> Automatic reboot in progress... AS> /dev/ad0s1a: FILESYSTEM CLEAN; SKIPPING CHECKS AS> /dev/ad0s1a: clean, 393048 free /dev/ad0s1e: FILESYSTEM CLEAN; SKIPPING AS> CHECKS AS> /dev/ad0s1e: clean, 49144 free (48 frags, 49125 blocks, 0.0% fragmentation) AS> (8 frags, 6142 blocks, 0.0% fragmentation) AS> (48 frags, 49125 blocks, 0.0% fragmentation) AS> mfs: /dev/ad1s1b: Device not configured AS> /dev/ad1s1f: CAN'T CHECK FILE SYSTEM. AS> /dev/ad1s1f: UNEXPECTED INCONSISTENCY; RUN fsck MANUALLY. AS> Can't open /dev/ad1s1f: Device not configured AS> WARNING: AS> WARNING: /var mount failed, building emergency /var AS> WARNING: AS> are there any possible passes to recover the system, or we need to AS> change hard drive? AS> Is it possible to run system without hard drive temporary and where can AS> i find some docs about this? AS> thanks, _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
