On Sun, 15 Apr 2007, waqas Mohammad wrote: > I have two upstream providers i am running BGP , i am receiving prefixes > with BGP community TAG from my customer's router he want to select one of my > up stream provider for out going . currently route selection is on AS PATH > Length. > > what configuration should I do to send the traffic using community tags > receiving from my customer.
This seems like a non-trivial problem. It seems you will need to (unless this is supported by your own topology and own traffic patterns and requirements) to perform policy-based routing for that customer or set up a tunnel. You might need to use filter-based forwarding for this. If I recall correctly, and this may have changed since then, FBF couldn't be configured using community tags but rather required more static configuration (e.g., a prefix-list). OTOH, affecting customer's upstream provider for _incoming_ could probably be achieved without policy-based routing. -- Pekka Savola "You each name yourselves king, yet the Netcore Oy kingdom bleeds." Systems. Networks. Security. -- George R.R. Martin: A Clash of Kings _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
