Hi,
It would look like:
ABCD+ .{0,2}
Regards,
Jeff
> -----Original Message-----
> From: [EMAIL PROTECTED] [mailto:juniper-nsp-
> [EMAIL PROTECTED] On Behalf Of Kanagaraj Krishna
> Sent: vrijdag 20 april 2007 12:54
> To: [email protected]
> Subject: Re: [j-nsp] AS path access list (regexp)
>
> Hi,
> I have this AS path access list to one of my BGP peerings (inbound
> route map) which is based on Cisco to set different local pref to:
>
> - direct peering AS
> - direct peering AS + 1st AS hop
> - direct peering AS + 1st AS hop + 2nd AS hop
>
> Based on Cisco
> -----------------------
> ip as-path access-list 77 permit ^(ABCD_)+$
> ip as-path access-list 77 permit ^(ABCD_)+[0-9]+$
> ip as-path access-list 77 permit ^(ABCD_)+[0-9]+_[0-9]+$
>
>
> How do i mirror the same requirement on a Juniper? Thanks.
>
> Regards,
> Kana
> _______________________________________________
> juniper-nsp mailing list [email protected]
> https://puck.nether.net/mailman/listinfo/juniper-nsp
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
