Can you provide interface config, 'show ipv6 neighbors', and also try to ping link-local on that interface?
micko On Fri, May 25, 2007 at 02:36:14PM -0400, Aaron Daubman wrote: > Dragan, > > On 5/25/07, Dragan Mickovic <[EMAIL PROTECTED]> wrote: > > juniper does not support broadcast interfaces for next-hop, set > > the next-hop to be an IP. > > How would I do this when the interface has no unicast global (how > would the router know how to reach the next-hop IP?). > > Also, on the following site, the "Example: Configuring Independent > Preferences for an Unnumbered Ethernet Interface" sections shows a > broadcast interface being used as the next-hop - why does that example > work? > > http://www.juniper.net/techpubs/software/junos/junos83/swconfig83-routing/id-10373744.html > > Thanks again, > ~Aaron _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
