Has anyone toyed much with the 802.3ah OAM support in JunOS 8.2R1.7 (or newer) at all? The docs indicate how to configure it and such, but I have yet to determine a method by which I can be notified if the Juniper (T640s in this case) receives a given type of OAM message. For example, we use OAM with another vendor, and if the switch receives, say, a Dying Gasp from a remote piece of equipment (perhaps a media converter), my switch will send an SNMP Trap to my OpenView server to notify our NOC in near-real-time. Has anyone figured out how to do this with JunOS ? I understand JunOS's OAM support is pretty new, but unless I'm wrong (entirely possible), it thus far seems fairly featureless. The only way to see OAM events is 'show oam ...'. Thanks in advance for any ideas/direction. JTAC pointed me to the docs I had already read, and that was it.
David _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
