You can do what you want by using "loopback groups" on the 50. You define the loopback interface, place the NAT information you want to use (MIP or DIP) on the loopback. Then tie the external interfaces to the loopback via a loopback group.
Joe Joe Horton 972-663-3010 mailto://[EMAIL PROTECTED] -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Gabriel Sent: Tuesday, July 17, 2007 7:23 AM To: [email protected] Subject: [j-nsp] ns-50 NAT problem Hi, I am having problems configuring a nat on a netscreen 50. Basically I have two interfaces facing the web with two different types of links and an internal interface facing the office. What I would like to do is have the NAT use a loopback IP on the netscreen as the translation IP...but for some reason this doesn't work. The only way I have been able to make it work is by binding the NAT IP to one of the external interfaces...but this is not what I want since I would like my configuration to be redundant so that if one of my external interface fails...I'm still online. Thanks, Gabriel _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
_______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
