>From hardware viewpoint, it will work without a problem. Only difference between PE- modules and P- modules is that PE- moduels have hardware ejector handle to make it easy for how-swap installation/removal. But there is also support contract problem when you use P- modules in M10.
If you use P- modules in M10 chassis, it will be invalidate your support contract. Hyun Hyunseog Ryu Senior Network Engineer Norlight Telecommunications, Inc./Applications Engineering 13935 Bishops Drive Brookfield, WI 53005 Phone. +1-262-792-7965 Fax. +1-262-792-7733 Email. [EMAIL PROTECTED] "W. Kevin Hunt" <[EMAIL PROTECTED]> Sent by: [EMAIL PROTECTED] 07/30/2007 04:34 PM To <[email protected]> cc Fax to Subject [j-nsp] M40 to M10 conversion We're contemplating replacing our 2 old M40's with 2 M10's we acquired via the buyout of a bankrupt company's assets. I've had a few folken' tell me that I can use my current PICs in the M10's, I just need to be prepared for a bit of a time removing them if I ever needed to. I'd hate to go buy 5 GigE interfaces for the M10's if my current P-GigE-SX-B will work... Anyone done this? Any caveats ? _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
