Hi Amos,
Just to complete the excellent answer of Sean.
In the documentation I can read :
"Like Ethernet interfaces, a Frame Relay interface requires the
specification of CCC encapsulation at both the device and logical unit
levels. When the device is set to support CCC encapsulation, Frame Relay
DLCIs range 512 through 1022. DLCIs from 0 through 510 can be used for
normal Frame Relay traffic."
Regards,
Samuel
Hi Amos
Depending on hardware/software , you may be able to configure
"encapsulation extended-frame-relay-ccc" , this should remove this
limitation
cheers
Sean
begin:vcard
fn:Samuel GAY
n:GAY;Samuel
org:CS SI;Network Services
adr;quoted-printable:;;22 avenue Galil=C3=A9e;Le Plessis Robinson;;92350;FRANCE
email;internet:[EMAIL PROTECTED]
title;quoted-printable:Ing=C3=A9nieur Support
tel;work:01 41 28 44 28
tel;cell:06 32 20 31 83
url:http://www.c-s.fr
version:2.1
end:vcard
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
