Hello,
I'm new to JunOS (coming from Foundry) and am enjoying
the experience a lot.
I just have a small problem, I can't seem to figure
out how to add a (BGP) community to a direct route so
that I can export it together with aggregate and
static routes in a community based BGP export policy.
i.e.
I want to export 192.168.0.0/24, 192.168.1.0/24 and
192.168.2.0/24 to an iBGP neighbor.
I'm using Junos 7.6.
[EMAIL PROTECTED] show interfaces ae0.2
vlan-id 2;
family inet {
address 192.168.0.1/24;
address 192.168.1.1/24;
}
[EMAIL PROTECTED] show routing-options static route
192.168.2.0/24
discard;
no-install;
community 65000:10;
[EMAIL PROTECTED] show policy-options policy-statement
RR-customers
term customers {
from {
protocol [ static aggregate ];
community origin-customer;
}
then accept;
}
then reject;
[EMAIL PROTECTED] show policy-options community
origin-customer
members 65000:10;
Any pointer are appreciated.
Thanks, Lev
____________________________________________________________________________________
Park yourself in front of a world of choices in
alternative vehicles. Visit the Yahoo! Auto Green
Center.
http://autos.yahoo.com/green_center/
____________________________________________________________________________________
Park yourself in front of a world of choices in alternative vehicles. Visit the
Yahoo! Auto Green Center.
http://autos.yahoo.com/green_center/
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
