typo: 'monitor traffic interface a/b/c' or 'monitor traffic interface a/b/c.x' command.
Sorry for multiple emails, Erdem On 9/5/07, Erdem Sener <[EMAIL PROTECTED]> wrote: > Hi, > If you are pinging _from the router_, you should be able to see your > icmp traffic with 'monitor traffic a/b/c.x' command. > > If rip updates are all you see, I'd say you're using another egress > interface than ge-0/0/1 for your destination. > > You may check this with show route x.x.x.x and see your next-hop. > > Hope this helps, > Erdem > > On 9/5/07, M.Mihailidis <[EMAIL PROTECTED]> wrote: > > hello guys i want to monitor a interface to see what source address it is > > using when i try to ping a certain address > > i used "monitor traffic interface ge-0/0/1 extensive" > > and all i got was the rip routing updates as output. > > any suggestions? > > _______________________________________________ > > juniper-nsp mailing list [email protected] > > https://puck.nether.net/mailman/listinfo/juniper-nsp > > > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
