Hi, http://www.juniper.net/techpubs/software/junos/junos83/swconfig83-network-interfaces/html/interfaces-ethernet-config2.html
The statement speed (10m | 100m) applies only to the management Ethernet interface (fxp0) and to the Fast Ethernet 12-port and 48-port Physical Interface Cards (PICs). The 4-port and 8-port Fast Ethernet PICs support a speed of 100 Mbps only. Thanks, ~Erwin On 9/5/07, Ras <[EMAIL PROTECTED]> wrote: > > I've just tried to set a port on an PE-4FE-TX to 10m (set interfaces > fe-0/0/1 speed 10m). This works fine on our PE-12FE-TX and the 'commit > check' says all is well, but when I commit I get: > > /kernel: %KERN-2: fe-0/0/1: Illegal media change: invalid speed > > Are these 100m only ports? If not, what else might be wrong? > > Thanks, > Ras > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
