Xavier, Here is some good docs that might help:
http://www.juniper.net/techpubs/software/junos/junos84/swconfig84-servic es/id-13031383.html http://www.juniper.net/techpubs/software/junos/junos84/swconfig84-servic es/id-10041097.html http://www.juniper.net/solutions/literature/app_note/350035.pdf - Dan > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of > Xavier Beaudouin > Sent: Friday, September 07, 2007 11:04 AM > To: [email protected] > Subject: [j-nsp] M20 + P-AS and simple NAT ? > > > Hello, > > I have fundamental question about Nat and how to setup with a P-AS. > > I have the following setup > > ge-0/2/0.10 (10.1.2.189)---M20--ge-0/1/0.8 (172.31.17.254) > > I need to make some NAT from ge-0/1/0.8 when unicast > connection is done > on 172.31.17.0/24 to any machines. > > The thing I don't understand is how associate the P-AS (and interface > sp-0/0/3.<xx>) to interface ge-0/2/0.10.... ? > > Thanks, > > /Xavier > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
