Hi,
Is there a way to manually set the link local address of an interface in
8.x? I am running into a problem where I have T1 interfaces connected
through a CT3 and they both have the same link local address. This is a
back-to-back CT3 using logical-routers:
[EMAIL PROTECTED] run show interfaces t1-0/1/0:0 | match fe80
Destination: fe80::/64, Local: fe80::2a0:a5ff:fe28:f
[edit]
[EMAIL PROTECTED] run show interfaces t1-0/1/1:0 | match fe80
Destination: fe80::/64, Local: fe80::2a0:a5ff:fe28:f
The intended result is to have different addresses so my OSPF3
adjacencies can come up:
Sep 18 21:34:49.963624 OSPF packet ignored: Our interface address is
source address fe80::2a0:a5ff:fe28:f
I've attempted to use the 'preferred' keyword on the v6 address, but
that didn't work.
Any insight would be appreciated.
Thanks,
eric
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
