On a similar note, does anybody know if Junipers will be any good at load balancing multiple GRE tunnels between two devices?
-- Leigh David Ball wrote: > The following URL may help to explain: > > http://juniper.cluepon.net/index.php/Load_Balancing > > as would the official JUNOS doc on the matter: > > http://www.juniper.net/techpubs/software/junos/junos84/swconfig84-routing/id-10480125.html > > As for workarounds, sounds like getting the Internet Processor I > ASIC would be the only way (and I can't help but think that such a > move would be generally discouraged). > > NB: the first site is neither affiliated nor endorsed by Juniper > Networks..but contains good info. > > David > > > On 20/09/2007, Nick Kraal <[EMAIL PROTECTED]> wrote: > >> Dear all, >> >> As I understand it, Juniper routers do not support per packet load >> balancing on multiple interfaces similar to Cisco, and only in a per >> flow fashion. >> >> Is there is any workaround for this? >> >> Regards, >> >> -nick/ >> _______________________________________________ >> juniper-nsp mailing list [email protected] >> https://puck.nether.net/mailman/listinfo/juniper-nsp >> >> > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
