The packet_get() error below means that the ssb can't get any packet memory to send an PFEMAN IPC message back to the RE. Most likely, it means that the SSB is running out of memory. You might need to check the memory utilization level there and see if that's expected or this is some kind of memory leakage problem.
Please check with JTAC on this. Thanks -Ashok -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Nicolaj Kamensek Sent: Monday, December 03, 2007 10:14 PM To: [email protected] Subject: [j-nsp] M20 /w SSB-E16, packet_get() failed Hello list, we recently upgraded a M20 router with SSB-E16 to JunOS 8.4R2.3 and since that, I see the following in the log files periodically: Dec 3 16:09:09 re0 ssb ipc_pipe_get_packet(): packet_get() failed! Dec 3 16:09:13 re0 last message repeated 53 times Dec 3 16:55:28 re0 ssb ipc_pipe_get_packet(): packet_get() failed! Dec 3 16:55:33 re0 last message repeated 59 times Dec 3 17:13:43 re0 last message repeated 101 times Dec 3 17:29:57 re0 ssb ipc_pipe_get_packet(): packet_get() failed! Dec 3 17:30:05 re0 last message repeated 104 times Does anybody know what that means? Is it normal or something I should worry about? Thanks & regards, Nicolaj Kamensek -- Accelerated IT Services GmbH Schubertstrasse 10 D-67251 Freinsheim [EMAIL PROTECTED] http://www.accelerated.de/ Telefon: +49 69-25738580-3 Telefax: +49 69-25738580-4 HRB: 60665 - Amtsgericht Ludwigshafen UstID: DE253684415 Geschäftsführende Gesellschafter: Nicolaj Kamensek & Ole Krieger _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
