I have some trouble with pim over l2 tunnel built with mpls-relay. In a scenario like this:
CISCO PE --- E320 --- DSLAM --- cpe with mpls relay enabled on e320 pim neighborship between cpe and pe didn't come up. All the rest work fine, bgp comes up, ping works ecc.ecc. Below the conf of the juniper interface: interface gigabitEthernet 2/0/4.3100 ! vlan id 3100 mpls-relay 10.255.255.255 3100 any hints ? Regards, Gianluca _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
