1router.geek schrieb: Hi,
> First, how can you tell which scb 2 you have? I believe all of mine are the > 8mb version since they show 8Megs for the show jtree 0 memory output? Is > that the correct way to determine if it's an 8M or 16M scb? yes, it is. The SCB-E16 does have 256MB of DRAM and 16MB SSRAM(equivalent to the SSB-E16). > Second, is there an scb with more than 64M of cpu dram or is it possible to > upgrade the memory on the scb to 128M? Possibly something similar to the > 128 ssb upgrade on juniper.cluepon.net? Absolutely: [EMAIL PROTECTED]> show chassis scb SCB status: Temperature 25 degrees C / 77 degrees F CPU utilization 1 percent Interrupt utilization 0 percent Heap utilization 30 percent Buffer utilization 52 percent Total CPU DRAM 128 MB Internet Processor II Version 1, Foundry IBM, Part number 9 Start time: 2007-12-12 03:10:51 CET Actually, the SCB-E is almost a 100% like the SSB-E apart from the connectors. There is also 2 memory slots which support 2x 64MB of DRAM. You can simply install a module from another SCB-E or even from a SSB-E. (On the SCB-E, it's a little more difficult than on the SSB-E because there is less room for inserting the DRAM module due to the thinner faceplate) > I'm opening a tac case with Juniper to see what they can tell me but I'm > thinking the scb IIv1's I have could be upgraded to scb-16 but that this > would still only have 64M of cpu dram, which is what I'm running low on. Correct, the SSRAM should not be your problem, the heap referes to the DRAM usage and for todays needs, 64MB is pretty few. Hope that helps! Best regards, Nico -- Accelerated IT Services GmbH Schubertstrasse 10 D-67251 Freinsheim [EMAIL PROTECTED] http://www.accelerated.de/ Telefon: +49 69-25738580-3 Telefax: +49 69-25738580-4 HRB: 60665 - Amtsgericht Ludwigshafen UstID: DE253684415 Geschäftsführende Gesellschafter: Nicolaj Kamensek & Ole Krieger _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
