Not sure. What you can do though is telnet or ssh to the device, run the "exec" command and then see the output by typing
"get log sys reverse" Scroll to the top of output. -----Original Message----- From: Vincent De Keyzer [mailto:[EMAIL PROTECTED] Sent: Wednesday, January 09, 2008 9:36 AM To: Bradford Darr Cc: [email protected] Subject: Re: [j-nsp] HA - SSG-550 (A/P) Thanks, (taking this back after Christmas break) do you have any idea why the output of this command is sent to the console only? Wouldn't it be nice to see it in your ssh session as well? Vincent Bradford Darr wrote: > Try the following: > > exec nsrp sync global-config check-sum > > This will tell you whether the devices are in sync. > > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Vincent De > Keyzer > Sent: Friday, December 21, 2007 6:32 AM > To: [email protected] > Subject: [j-nsp] HA - SSG-550 (A/P) > > Hi, > > I am setting up a HA pair of SSG-550 (active/passive). > > I can see that they are synchronized, because config changes made on one > > are replicated to the other; but is what is the command to check that > they are synchronized (without changing the config)? > > Vincent > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp > > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
