Hi all, Is it possible to configure JUNOS to do both IP and TCC on the same interface? I'm attempting to test out whether I can take a SONET OC3 and transport it back to terminate on an Ethernet VLAN on another router. The topology is simple:
Router A <===> Router B <===> Router C Juniper Cisco Juniper - Router B is connected to both routers via GE 802.1q trunk - Router C is connected to a SONET OC3 I'd like to keep layer 3 connectivity between A&B and B&C on one VLAN, but use another VLAN on Router C's GE trunk to transport the OC3 to Router A through a xconnect on Router B. Is this possible? thanks, evt _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
