I've done successfully the trunking on 2 fastethernet M5 ports aggregated with outgoing traffic 95% load balanced, the switch is catalyst 2924XL.
Thanks to Ariff. rgs a. rahman isnaini rangkayo sutan Tim Durack wrote: > On Jan 31, 2008 9:59 AM, Nicolaj Kamensek <[EMAIL PROTECTED]> wrote: >> Antonio Querubin schrieb: >> >> Hi, >> >>> Anybody know if Junipers are able to do ethernet aggregation with an HP >>> Procurve 4000M switch? The Procurve 4000M config menu provides 3 >>> different aggregation types: Trunk, FEC, and SA-Trunk. Would any of >>> these work with an M5 running JunOS 7? >> guess "trunk" should work. Doesn't the 4000M support lacp? If you're >> running an older procurve image, try an update which is available for >> free at www.hewlett-packard.com. > > No LACP on the old 4000s. Static trunking should work with any > equipment (assuming the other side can be configured for a static > trunk.) > > Tim:> > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp > > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
