It has been almost 2 years (if memory serves), but I did have this configured in our lab between a couple of M10i/M7i's and a 7750. It took a bit to actually get it to work from what I remember, but if you'd like I can dig up my old notes and see if I have the 7750 config archived (this would have been with the beta 3.x release, for what its worth).
Regards, -Jeff ________________________________________ From: [EMAIL PROTECTED] [EMAIL PROTECTED] On Behalf Of Atul Kant [EMAIL PROTECTED] Sent: Tuesday, February 05, 2008 7:05 PM To: [email protected] Subject: [j-nsp] Juniper M40e and ALU 7450 InterOp Hi, Does anyone tried or know if MPLS tunnel can be established between Juniper M40e and ALU 7450. ALU 7x50 defines SDP for inter-node service tunnel. I am wondering if it is possible when defining the SDP to give the far-end address that is actually a Juniper M40e loopback address and do a similar Juniper specific Config on the M40e. Will this work ? I am planning to test this once I get the lab organized, meanwhile just trying to find out if anyone else has done it or has similar requirements. Thanks, Atul Kant Data Solutions Specialist IP Services Alcatel-Lucent Australia Phone ~ +617 3367 4149 Mobile ~ +614 4841 0812 _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
