Hi, Check to see if you have any configuration relating to domain-maps:
aaa domain-map none router-name default local-interface loopback 0 ipv6-router-name default I think the issue is more related to the loopback for unnumbered interfaces. Make sure the entry in the domain-map or profile points to the loopback you are using for unnumbered interfaces. Regards Matt On 19/02/2008, Richard Hartensveld <[EMAIL PROTECTED]> wrote: > > Hi, > > I'm having trouble dynamically creating IP interfaces in the right > virtual-router on ERX310. > > What would be the correct RADIUS attribute to place dynamically created IP > interface in > the correct virtual-router ? > > If I use 'ip virtual-router ABC' in the ppp profile, the user is placed in > the correct VR, > however when I try setting the VR through radius, I keep getting: > > ERROR 02/19/2008 13:12:10 ipProfileMgr: Dynamic IP interface creation > aborted, > NEITHER inherited interface NOR local address are configured > > I've tried both attributes ERX-Virtual-Router-Name and > Unisphere-Virtual-Router, but both don't seem > to work. > > > Any hints or tips? Am I using the wrong RADIUS attribute ? > > Kind regards, > > Richard > > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
