interfaces {
ls-0/0/0 {
per-unit-scheduler;
unit 0 {
fragment-threshold 640;
interleave-fragments;
}
}
se-1/0/0 {
per-unit-scheduler;
encapsulation frame-relay;
lmi {
lmi-type itu;
}
unit 0 {
point-to-point;
dlci 200;
family mlfr-end-to-end {
bundle ls-0/0/0.0;
}
}
}
}
AFTER THE COMMIT:
[edit]
[EMAIL PROTECTED] commit
[edit interfaces se-1/0/0 unit 0]
'family'
family mlfr-end-to-end not valid on this interface.
error: configuration check-out failed
[edit]
[EMAIL PROTECTED]
... so ... the conclusion is that I cannot configure packet
fragmentation and packet interleaving for FRAME-RELAY in JUNOS J-Series
with SERIAL Interfaces ?
Thanks a lot,
Giuliano
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
