Hello,
we have a Netscreen 25 at our office (30 people), that we use for
Internet access and VoIP.
From time to time the firewall goes bananas: traffic does not go
through anymore, ping success rate to default gateway is very low, and
if we succeed to login, we see very high CPU and messages in the log
that say:
2008-03-13 15:08:31 system crit 00051 Session utilization has reached
28857,
which is 90% of the system capacity!
2008-03-13 15:08:29 system crit 00051 Session utilization has reached
28857,
which is 90% of the system capacity!
2008-03-13 15:08:28 system crit 00051 Session utilization has reached
28857,
which is 90% of the system capacity!
2008-03-13 15:08:27 system crit 00051 Session utilization has reached
28857,
which is 90% of the system capacity!
2008-03-13 15:08:26 system crit 00051 Session utilization has reached
28857,
which is 90% of the system capacity!
2008-03-13 15:08:24 system crit 00051 Session utilization has reached
28857,
which is 90% of the system capacity!
2008-03-13 15:08:19 system crit 00051 Session utilization has reached
28857,
which is 90% of the system capacity!
2008-03-13 15:08:18 system crit 00051 Session utilization has reached
28857,
which is 90% of the system capacity!
2008-03-13 15:08:16 system crit 00051 Session utilization has reached
28857,
which is 90% of the system capacity!
How do I troubleshoot this? What are those sessions? How do I identify
them? How do I limit them? Is it a good thing to limit them?
I don't know where to start, so any idea will be appreciated.
Thanks
Vincent
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
