Hello Erdem, thanks, i received a very similar method, however i fixed it by switching mastership of the RE's. I'll write this done in case it happens again.
Regards, Jonas Frey On Sat, 2008-04-05 at 19:03, Erdem Sener wrote: > Hi Jonas, > > It seems to me your configuration database is corrupted since 'clear > system commit' is not working properly, which should. > > Here's something else you can try. Be *VERY* careful though since > this process will erase your configuration > at some point, so I suggest you back it up in your workstation too, > just in case and make sure you have console access to the box > > [EMAIL PROTECTED]> configure > [EMAIL PROTECTED] # save Saved-config > [EMAIL PROTECTED] # run file list | match "/" > > /var/home/lab/: ========> remember this path, just in case > you need to login with another user via console later. > > [EMAIL PROTECTED]> start shell user root > Password: > [EMAIL PROTECTED] cd /var/rundb > [EMAIL PROTECTED] ls juniper* > juniper.data juniper.db juniper.save > [EMAIL PROTECTED] rm juniper.* > [EMAIL PROTECTED] exit > exit > > [edit] > [EMAIL PROTECTED] exit > [EMAIL PROTECTED]> configure > Entering configuration mode > The configuration has been changed but not committed > > [edit] > [EMAIL PROTECTED] show > ## Last changed: 2008-04-05 18:51:27 CEST > > [EMAIL PROTECTED] commit check > error: cannot commit an empty configuration # ==:> all your config is > deleted > > [EMAIL PROTECTED] load override Saved-config # == > use 'load override' to > recover your last "couldnt-be-committed" version of the config > load complete > > [edit] > [EMAIL PROTECTED] show # =======> check your configuration here !!!! > > [snipped] > > [edit] > [EMAIL PROTECTED] commit and-quit # =======> now you should be able to commit > commit complete > Exiting configuration mode > > [EMAIL PROTECTED]> > > > HTH > Erdem > > On Sat, Apr 5, 2008 at 4:39 AM, Jonas Frey <[EMAIL PROTECTED]> wrote: > > Hello, > > > > thanks for all the suggestions: > > > > commit / rollback 0 > > > > request system logout user root > > > > request system logout pid 26710 > > clear system commit > > > > However none of these work. Does anyone have any other suggestion? > > > > > > > > Regards, > > Jonas Frey > > > > _______________________________________________ > > juniper-nsp mailing list [email protected] > > https://puck.nether.net/mailman/listinfo/juniper-nsp > >
_______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
