I have found this in the Juniper documentation. It seems interesting: https://www.juniper.net/techpubs/software/erx/junose90/swconfig-bgp-mpls/html/mpls-config13.html#2124222 Regards, Samuel
________________________________ De: [EMAIL PROTECTED] de la part de [EMAIL PROTECTED] Date: mar. 15/04/2008 10:49 À: [EMAIL PROTECTED]; [email protected] Objet : [j-nsp] RE : LDP issue between M10i and ERX > I enabled LDP on loopback (but only on the M10i side) but the result is the > same. Dont you think that running LDP on loopback is required for > establishing directed/targeted LDP session? You have to activate LDP on loopback if you want use Enhanced LDP, what is useful if you configure Martini L2-VPN and LDP as the signaling protocol. Regards, Samuel _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
