> Look at the ERO using trace-options or show rsvp session. Unfortunetely I can't change the configuration for it. About the command "show rsvp session" I don't see ERO information.
This is my "problem" in detail. In fact I am doing some migrations to install a new Juniper router. During a short period the routers (old and new one) are beside and when the migration is finished I power off the old one. To put this new router in the network I use a new loopback address. I need to know the stricts LSPs going through the old router, to configure the new loopback on the ingress routers (if loopback is used in the path). Currently I use the command "show mpls lsp transit" to know which LSPs are in transit and after I go on each router where come from the LSPs to know if a strict path with the old loopback is configured. I would like to find a way to simplify this. Thanks, Samuel -----Message d'origine----- De : Doug Marschke [mailto:[EMAIL PROTECTED] Envoyé : lundi 21 avril 2008 20:08 À : Gay,S,Samuel,JPECS R; [email protected] Objet : RE: [j-nsp] MPLS, RSVP and strict path Look at the ERO using trace-options or show rsvp session. Doug Marschke Principal Technologist Strategic Networks Training JNCIE-ER #3, JNCIE-M/T #41, JNCIS-FW, JNCI www.ietraining.net (415)902-5702 -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: Monday, April 21, 2008 2:31 AM To: [email protected] Subject: [j-nsp] MPLS, RSVP and strict path Hi Group, Do you know a easy way to see if a LSP going through a transit router is configured with a strict path ? Thanks for your help, Samuel _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
