Chuck Anderson <[EMAIL PROTECTED]> writes: > How about using an anycast IP address assigned to the loopback > interfaces of the cluster systems and run a routing protocol between > the cluster nodes and the router.
I'm not sure clusterip will just work with that. But I'm not tied to clusterip, if I can't get this working there's plenty of fallback options. "Stefan Fouant" <[EMAIL PROTECTED]> writes: > Not really sure but I would think that even with or without IGMP/PIM > enabled on the interface, the router probably doesn't know what to do > with that packet since it doesn't have corresponding IGMP/PIM join > state to match the incoming packet. I'm pretty new to PIM. Is there a way to setup a corresponding thing, or should I just not go down this path? seph _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
