-----Original Message-----
From: Thorsten Muller
Sent: 08 May 2008 09:32
To: [email protected]
Cc: Thorsten Muller
Subject: RE: Juniper Encapsulation question on MX960
Hi,
I have a question about the Ethernet encapsulation in L2 VPN's on a MX960
I want to connect a customer on a 10G interface in a p2p L2 VPN.
The customer wants to send his own vlans over the port (so the port needs to
be transparent to vlans)
Which encapsulation do I need ?
the documentation states: (Junos 8.5)
ethernet-ccc
Use Ethernet CCC encapsulation on Ethernet interfaces that must accept
packets carrying standard Tag Protocol ID (TPID) values.
extended-vlan-ccc
Use extended VLAN encapsulation on CCC circuits with Gigabit
Ethernet and 4-port Fast Ethernet interfaces that must accept packets
carrying 802.1Q values.
What do you people suggest?
Anything else to take into consideration ?
--
Cheers
Thor
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
