On Wed, May 14, 2008 at 09:06:27AM -0400, Jose Madrid wrote: > I think I am the only one having issues with my J2320. I use it as a > peering device and have 91 BGP peers on there. It has 1GB of RAM, > about 492K routes, and it averages 72% CPU utilization. Traffic-wise, > it does about 38Mbps to one peering point and 55Mbps to another. It > is holding up surprisingly well, but to be honest I expected a bit > more. Maybe sometimes I am too demanding, and this was a $2000 > device, so I shouldnt complain much :)
You're not the only one... :) However, my complaint is quite different - my J6350/1G RAM is unable to run full-view :) Sessions just drops due to low memory... Well, based on others experience I can suggest that it's because I run lots of 'not-so-standard' stuff, like all my iBGP sessions configured for 'family inet labeled-unicast resolve-vpn', 'family inet-vpn' and 'family inet6'... And, anyway, full-view is never considered something I must run on that router. PS: no problems with traffic. Right now it runs ~700Mbit at 50% idle. And costs much less than c7301 it replaced :) _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
