I have new m120 connected on stick to the Extreme switch.
10GE
m120<-------------->summit<----->
in=2 x out(??) in=out
M120 has only one interface - xe-0/0/0 with many 802.1q subinterfaces.
So traffic on xe-0/0/0 should be exactly symmetrical (in/out = 1) but it is
not!!
Mrtg shows that traffic on 10G summit is exactly symmetrical but on xe-0/0/0
is asymmetrical:
[EMAIL PROTECTED]> monitor interface traffic
Interface Link Input bytes (bps) Output bytes (bps)
xe-0/0/0 Up 61944473131097 (318338324) 30951930138936 (156175948)
Input traffic is approximatly twice geater than output (in/out = 2).
What is happen? Why input traffic is greater than output traffic.
What doubled input traffic on xe-0/0/0?
Before installing M120 I had:
LACP 2x1GE
m5<-------------->summit<----->
<-------------->
ae0
and everything was ok (in was eq out on ae0)!!!!
Any idea?
--
Witold Kościelniak
Network Administrator
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
