Try this: http://www.juniper.net/techpubs/software/junos/junos85/swconfig85-multicast/id-13041423.html#id-13041423
On 5/20/08, Dave Diller <[EMAIL PROTECTED]> wrote: > > Normally, the system uses the vrf-target to import routes from > bgp.l3vpn.0 to the correct VRF.inet.0. This is working fine for > unicast routes. I'm trying to do the same now to get routes from > bgp.l3vpn.2 to VRF.inet.2 > > Routes are received correctly in bgp.l3vpn.2 from the peer, are > active, have the correct route-distinguisher, and the correct vrf- > target, but never make it into the destination table. > > Am I missing something additional needed here? It all "looks" ok to > me... > > -dd > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
