Hi Andrew, If ever you upgrade to 9.0+, you could use 'indexed-next-hop' knob:
http://www.juniper.net/techpubs/software/junos/junos90/swconfig-policy/indexed-next-hop.html Following may also be interesting for you: http://www.juniper.net/techpubs/software/junos/junos90/swconfig-policy/per-prefix.html#per-prefix-statement Cheers, Erdem On Mon, Jun 2, 2008 at 3:38 PM, Andrew Degtiariov <[EMAIL PROTECTED]> wrote: > Hello! > We have problems with incorrect balancing on asX interfaces: one of > interfaces from bundle always full loaded but other have a free > bandwidth. > > [EMAIL PROTECTED]> show interfaces as0 detail > Physical interface: as0, Enabled, Physical link is Up > Interface index: 128, SNMP ifIndex: 38, Generation: 11 > Description: XXXXXX > Link-level type: Cisco-HDLC, MTU: 4474, Speed: 311040kbps, Minimum > links needed: 1 > Device flags : Present Running > Interface flags: SNMP-Traps Internal: 0x4000 > Link flags : Keepalives > Keepalive settings: Interval 10 seconds, Up-count 1, Down-count 3 > Last flapped : Never > Statistics last cleared: Never > Traffic statistics: > Input bytes : 88014189685409 100101256 bps > Output bytes : 233504346126377 224426680 bps > Input packets: 215881346509 39284 pps > Output packets: 320492035869 36532 pps > > Logical interface as0.0 (Index 67) (SNMP ifIndex 42) (Generation 6) > Flags: Point-To-Point SNMP-Traps 0x4000 Encapsulation: Cisco-HDLC > Statistics Packets pps Bytes bps > Bundle: > Input : 215879698457 39284 88014153428265 100101256 > Output: 320490390799 36490 233504161135208 224369696 > Link: > so-1/3/0:0.0 > Input : 15050048922 27106 6085042177400 66550112 > Output: 16070445975 12811 11743234420336 76498040 > so-1/3/0:1.0 > Input : 13382313 12178 4479819115 33551144 > Output: 26537823 23679 20157131134 147871656 > Protocol inet, MTU: 4470, Generation: 13, Route table: 0 > Flags: None > Addresses, Flags: Is-Preferred Is-Primary > ----cut-cut---- > Protocol mpls, MTU: 4458, Generation: 14, Route table: 0 > Flags: None > > [EMAIL PROTECTED]> show configuration interfaces as0 > description XXXX; > encapsulation cisco-hdlc; > aggregated-sonet-options { > minimum-links 1; > link-speed oc3; > } > unit 0 { > family inet { > address ---cut--cut---; > } > family mpls; > } > > [EMAIL PROTECTED]> show configuration interfaces so-1/3/0:0 > clocking external; > sonet-options { > no-payload-scrambler; > aggregate as0; > } > [EMAIL PROTECTED]> show configuration interfaces so-1/3/0:1 > clocking external; > sonet-options { > no-payload-scrambler; > aggregate as0; > } > > [EMAIL PROTECTED]> > > Platform: Juniper M20, JUNOS 7.5R2.8 > > Is there any ways to load interfaces in bundle as0 more fairly? > > -- > Andrew Degtiariov > DA-RIPE > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
