I'd have to see your config to give you a definitive answer but you might want to try enabling 'traffic-engineering bgp-igp' under [protocols mpls]. This will cause all your inet.3 routes to be moved into inet.0 and allow your IGPs (as well as BGP) to use the LSPs for forwarding traffic.
HTHs. Stefan Fouant Principal Network Engineer NeuStar, Inc. - http://www.neustar.biz On Tue, Jun 3, 2008 at 11:49 AM, sunnyday <[EMAIL PROTECTED]> wrote: > Hello I have configured mpls ldp in my network and I want all ip traffic to > go through mpls. > > I have issued the command mpls ldp ip-forwarding but the traffic seems to go > through isis when I trace route to an ip I see no label assignment. > > After that I have issued the mpls ldp ip-forwarding hosts-only and all /32 > traffic was going through mpls but all the /30 or other subnets > > Where going through isis.Any help would be appreciated. > > Thank you > > > > > > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
