Dear Group, I'm curious if anybody knows a workaround doing load balancing per packet on an m10i. I have a J4350 2xE1 connected to a M10i 2xE1 trying to do my best but as Juniper says; "an Internet Processor II ASIC sends packets with the same parameters to the same next hop, since they are in the same flow. The JUNOS software command to turn on load balancing uses the action load-balance per-packet, which is misnamed in relation to the Internet Processor II ASIC. On the Internet Processor II ASIC, this command actually enables per-flow load balancing." On Internet Processor II it actually does "per-flow" rather than "per-packet" I really appreciate if anybody has an input to this.
Thanks! Ilker YILMAZ _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
