Junaid,
You don't need a server for ICMP Echo Replies and ICMP Timestamp Replies.
Make sure these packets are not blocked by firewall though.
You only need a server for TCP/UDP and HTTP probe replies (unless you enable
JWeb on the remote router, in this case you don't need a server for HTTP
either).
Rgds
Alex
----- Original Message -----
From: "Junaid" <[EMAIL PROTECTED]>
To: "juniper-nsp" <[email protected]>
Sent: Wednesday, June 11, 2008 10:07 AM
Subject: [j-nsp] Changing a route based on latency
Hi,
I was going through the documentation for RPM (Real-time Performance
Monitor) and as I suspected, we need a server (Juniper router) at the
other end to send us responses. Is there a feature/solution that does
not require any config on the remote end; like we can send ICMP echos
and based on the response we can take some action.
What I need is a mechanism to change my uplink from my primary service
provider to my secondary service provider based on the delay/latency I
am experiencing on the primary link. Any suggestion?
Regards,
Junaid
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
