Hi Munish, You Extreme hang then you need to restart the device? Or you can't access your Extreme because your management using one of the management vlan on the trunking link from juniper to Extreme?
I'd been on that problem before but it happened on aggregate-ethernet with lacp on it (Extreme use port sharing with dynamic flow traffic). Sometimes I need to restart PIC FE on my M-series with JunOS 8.0R3.4 when the problem occurred. The problem come up when you include the scheduler-map statement (at the class-of-service interfaces aeX) hierarchy level and member link of the aggregate-ethernet goes intermittent (up/down), traffic forwarding on the routing platform halts for approximately 400 milliseconds or your Extreme port-sharing indicated ND (not distribute) (you need to re-create port-sharing sometimes it will help), or sometimes you need to restart PIC FE on juniper router based on PR from Juniper this already solved on JunOS 8.1R4 or latest. Thanks, Beny D Setyawan -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Munish Saini Sent: Tuesday, June 17, 2008 5:12 PM To: [email protected] Subject: [j-nsp] Extreme Switch Hang issue Hi all, I am using Extreme Switch summit 400 48t (Extremeware Version 7.5e.2.8) connected to Juniper M7i (JUNOS Base OS boot [8.0R2.8]). I sometime see that Extreme Switch hangs, but on juniper side none of ports is shown in down state. Does anybody have any idea of, if it is a known issue with any of the OS's. Thanks Munish Saini _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
